ULTRASONIC SENSOR REMOVAL


  1. REMOVE REAR BUMPER COVER


    1. Remove the rear bumper cover Click here.

  2. REMOVE NO. 3 LUGGAGE ROOM WIRE

    A01J3FX

    1. Disconnect the 2 ultrasonic sensor connectors.

    2. Detach the 3 clamps and remove the luggage room wire from the bumper cover.

  3. REMOVE NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure for both No. 1 ultrasonic sensors.


    1. Disconnect the connector.

    2. A01J52P

      While pushing down on the lever with a finger to release the claw on the top of the sensor, detach the claw on the other side to remove the No. 1 ultrasonic sensor.

      Tech Tips

      The type of claw on the top and the type of claw on the bottom of the sensor are different. Observe the claws carefully before removing the sensor.

  4. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    Tech Tips

    Use the same procedure for both No. 1 ultrasonic sensor retainers.


    1. A01J5Z0

      Detach the 2 claws and remove the No. 1 ultrasonic sensor retainer from the rear bumper cover.