CLEARANCE WARNING ECU INSTALLATION


  1. INSTALL REAR CLEARANCE WARNING ECU ASSEMBLY


    1. Install the rear clearance warning ECU with the bolt.

    2. Connect the connector.

  2. INSTALL QUARTER INSIDE TRIM BOARD RH


    1. Detach the 8 claws and 10 clips to install the quarter inside trim board.

    2. Install the clip.

    3. Connect the rear No. 2 seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    4. Connect the rear No. 1 seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    5. Attach the 2 claws to install the outer lap belt anchor cover.

      Tech Tips

      Use the same procedure for both outer lap belt anchor covers.

  3. INSTALL QUARTER TRIM HOOK

    Tech Tips

    Use the same procedure for both quarter trim hooks.


    1. Install the quarter trim hook with the screw.

  4. INSTALL BACK DOOR SCUFF PLATE


    1. Attach the 4 claws, 2 guides and 6 clips to install the back door scuff plate.

  5. INSTALL REAR DOOR SCUFF PLATE RH


    1. Attach the 2 clips and 7 claws to install the rear door scuff plate RH.

  6. INSTALL REAR NO. 2 SEAT ASSEMBLY RH

    Click here