CLEARANCE WARNING ECU REMOVAL


  1. REMOVE REAR NO. 2 SEAT ASSEMBLY RH

    Click here

  2. REMOVE REAR DOOR SCUFF PLATE RH


    1. A01J49Q

      Using a moulding remover, detach the 7 claws and 2 clips and remove the rear door scuff plate.

  3. REMOVE BACK DOOR SCUFF PLATE

    A01J5YF

    1. Detach the 4 claws, 2 guides and 6 clips and remove the back door scuff plate.

  4. REMOVE QUARTER TRIM HOOK

    A01J6J8

    Tech Tips

    Use the same procedure for both quarter trim hooks.


    1. Remove the screw and quarter trim hook.

  5. REMOVE QUARTER INSIDE TRIM BOARD RH

    A01J4KR

    1. Detach the 2 claws and remove the outer lap belt anchor cover.

      Tech Tips

      Use the same procedure for both outer lap belt anchor covers.

    2. A01J4XX

      Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

    3. A01J4Z3

      Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

    4. Using a clip remover, remove the clip.

    5. Detach the 8 claws and 10 clips and remove the quarter inside trim board.

      A01J7B4

  6. REMOVE REAR CLEARANCE WARNING ECU ASSEMBLY

    A01J415

    1. Disconnect the connector.

    2. Remove the bolt and rear clearance warning ECU.