STEERING PAD SWITCH INSPECTION


  1. INSPECT STEERING PAD SWITCH LH (w/o Multi-information Display)


    1. Measure the resistance according to the value(s) in the table below.

      A01J43VE01
      Text in Illustration
      *1 Volume+ Switch *2 Volume- Switch
      *3 Seek+ Switch *4 Seek- Switch
      *5 MODE Switch *6 Horn Wire
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      9 (AU2) - 8 (EAU) No switch pushed 95 to 105 kΩ
      9 (AU2) - 8 (EAU) MODE switch pushed Below 2.5 Ω
      10 (AU1) - 8 (EAU) No switch pushed 95 to 105 kΩ
      10 (AU1) - 8 (EAU) Seek+ switch pushed Below 2.5 Ω
      10 (AU1) - 8 (EAU) Seek- switch pushed 312.6 to 345.5 Ω
      10 (AU1) - 8 (EAU) Volume+ switch pushed 950 to 1050 Ω
      10 (AU1) - 8 (EAU) Volume- switch pushed 2954.5 to 3265.5 Ω
      1 (HO) - Horn wire Always Below 2.5 Ω

      If the result is not as specified, replace the steering pad switch assembly.

    2. Check the illumination.


      1. Connect the battery positive (+) lead to terminal IL+2 and the negative (-) lead to terminal EAU of the steering pad switch assembly connector.

      2. Check that the switch illumination comes on.

        OK
        Steering pad switch illumination comes on.

        If the result is not as specified, replace the steering pad switch assembly.

  2. INSPECT STEERING PAD SWITCH ASSEMBLY (w/ Multi-information Display)


    1. Measure the resistance according to the value(s) in the table below.

      A01J4I1E01
      Text in Illustration
      *1 Volume+ Switch *2 Volume- Switch
      *3 Seek+ Switch *4 Seek- Switch
      *5 MODE Switch *6 On Hook Switch
      *7 Off Hook Switch *8 DISP Switch
      *9 Horn Wire - -
      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      9 (AU2) - 8 (EAU) No switch pushed 95 to 105 kΩ
      9 (AU2) - 8 (EAU) MODE switch pushed Below 2.5 Ω
      9 (AU2) - 8 (EAU) On hook switch pushed 312.6 to 345.5 Ω
      9 (AU2) - 8 (EAU) Off hook switch pushed 950 to 1050 Ω
      10 (AU1) - 8 (EAU) No switch pushed 95 to 105 kΩ
      10 (AU1) - 8 (EAU) Seek+ switch pushed Below 2.5 Ω
      10 (AU1) - 8 (EAU) Seek- switch pushed 312.6 to 345.5 Ω
      10 (AU1) - 8 (EAU) Volume+ switch pushed 950 to 1050 Ω
      10 (AU1) - 8 (EAU) Volume- switch pushed 2954.5 to 3265.5 Ω
      7 (DISP) - 8 (EAU) DISP switch pushed Below 2.5 Ω
      1 (HO) - Horn wire Always Below 2.5 Ω

      If the result is not as specified, replace the steering pad switch assembly.

    2. Connect the battery positive (+) lead to terminal IL+2 and the negative (-) lead to terminal EAU of the steering pad switch assembly connector.

    3. Check that the switch illumination comes on.

      OK
      Steering pad switch illumination comes on.

      If the result is not as specified, replace the steering pad switch assembly.