STEERING PAD SWITCH REMOVAL

CAUTION:

Some of these service operations affect the SRS. Read the precautionary notices concerning the SRS before servicing Click here.


  1. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE STEERING PAD ASSEMBLY

    Click here

  4. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Multi-information Display)


    1. A01J5IUE01
      Text in Illustration
      *1 Pin
      *2 Clamp

      Disconnect the connectors and detach the 2 clamps.

    2. Remove the 2 screws.

    3. Detach the 4 pins and remove the steering pad switch.

  5. REMOVE STEERING PAD SWITCH LH (w/o Multi-information Display)

    Tech Tips

    Refer to the step "REMOVE STEERING PAD SWITCH ASSEMBLY".