RADIO ANTENNA CORD REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE ANTENNA CORD SUB-ASSEMBLY (for LHD)


    1. Disconnect the connector.

      A01J3W4

    2. Detach the 4 clamps as shown in the illustration. Then remove the antenna cord.