FRONT DOOR SPEAKER INSPECTION


  1. INSPECT FRONT NO. 1 SPEAKER ASSEMBLY


    1. A01J5MFE01
      Text in Illustration
      *a

      Component without harness connected

      (Front No. 1 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always Below 4 Ω

      If the result is not as specified, replace the front No. 1 speaker assembly.

  2. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY


    1. A01J6DSE10
      Text in Illustration
      *a

      Component without harness connected

      (Front No. 2 Speaker Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Always Below 1 Ω
      3 - 4 Always Below 1 Ω
      1 - Body ground Always 10 kΩ or higher
      3 - Body ground Always 10 kΩ or higher

      If the result is not as specified, replace the front No. 2 speaker assembly.