RADIO RECEIVER REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    A01J3ELE01

    1. for Manual Air Conditioning System:


      1. Put protective tape around the center instrument cluster finish panel.

      2. Using a moulding remover, detach the 10 claws and 4 clips.

      3. A01J3P7
        Text in Illustration
        *1 Protective Tape

        Detach the 4 claws and disconnect the air conditioner control.

      4. Disconnect the connectors and remove the center instrument cluster finish panel.

    2. A01J7H9E01
      Text in Illustration
      *1 Protective Tape

      for Automatic Air Conditioning System:


      1. Put protective tape around the center instrument cluster finish panel.

      2. Using a moulding remover, detach the 8 claws and 4 clips.

      3. Disconnect the connectors and remove the center instrument cluster finish panel.

  4. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)


    1. A01J30H

      Remove the 4 screws.

    2. Disconnect all the connectors and remove the radio receiver assembly with bracket.

  5. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY


    1. A01J3PW

      Remove the 4 screws.

    2. Disconnect all the connectors and remove the radio and display receiver assembly with bracket.

  6. REMOVE NO. 1 RADIO BRACKET (for Radio Receiver Type)


    1. A01J52C

      Remove the 3 screws and No. 1 radio bracket from the radio receiver.

  7. REMOVE NO. 1 RADIO RECEIVER BRACKET (for Radio and Display Type)


    1. A01J3LM

      Remove the 3 screws and No. 1 radio bracket from the radio receiver.

  8. REMOVE NO. 2 RADIO BRACKET (for Radio Receiver Type)


    1. A01J6GN

      Remove the 3 screws and No. 2 radio bracket from the radio receiver.

  9. REMOVE NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type)


    1. A01J3IZ

      Remove the 3 screws and No. 2 radio bracket from the radio receiver.