AUDIO AND VISUAL SYSTEM (for Radio and Display Type) Panel Switches do not Function

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK PANEL SWITCH


    1. Check for foreign matter around the switches that might prevent operation.

      OK
      No foreign matter is found.

    NG

    REMOVE ANY FOREIGN MATTER FOUND

    OK

  2. CHECK PANEL SWITCH


    1. A01J5HX

      Enter the "Panel Switch Check Mode" screen. [Refer to Check Panel & Steering Switch in Operation Check Click here]

    2. Operate the abnormal switch and check if the switch status is correctly displayed.

      OK
      The switch status is correctly displayed as operated.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here