AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CELLULAR PHONE

   
   

   1. Check if the other caller's voice can be heard properly.

      OK
      Voice can be heard properly.

      Tech Tips

      The purpose of this step is to inspect the cellular phone when it is not connected to the vehicle.

   
   

   NG

   REPAIR OR REPLACE CELLULAR PHONE

   OK

2. CHECK AUDIO AND VISUAL SYSTEM

   
   

   1. Check that sound from the audio and visual system can be heard from a front speaker.

      OK
      Sound can be heard from the audio and visual system.

   
   

   NG

   GO TO "NO SOUND CAN BE HEARD FROM SPEAKERS" IN PROBLEM SYMPTOMS TABLE Click here

   OK

3. CHECK AUDIO SETTINGS

   
   

   1. Check that the received voice level is not set to low.

      OK
      The received voice level is not set to low.

   
   

   NG

   SET VOLUME TO HIGH

   OK

   GO TO "NO SOUND CAN BE HEARD FROM SPEAKERS" IN PROBLEM SYMPTOMS TABLE Click here