LIGHT CONTROL RHEOSTAT REMOVAL


  1. REMOVE NO. 1 SWITCH HOLE BASE

    A01J5GWE01
    Text in Illustration
    *1 Protective Tape

    1. Put protective tape around the No. 1 switch hole base.

    2. Using a moulding remover, detach the 5 claws.

    3. Disconnect the connectors and remove the No. 1 switch hole base.

  2. REMOVE LIGHT CONTROL RHEOSTAT KNOB

    A01J37A

    1. Detach the claw and remove the light control rheostat knob.

  3. REMOVE LIGHT CONTROL RHEOSTAT

    A01J67N

    1. Remove the nut and light control rheostat.