DESCRIPTION
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| CB-52 | No playable files on the "iPod". |
|
| CB-7E | No playable files on the USB device. |
|
INSPECTION PROCEDURE
Note
The data stored on the USB device or "iPod" may be changed or lost due to malfunctions, repairs, system errors, etc. Therefore, when repairs are to be performed, explain this to the customer and obtain their consent prior to performing repairs.
Tech Tips
After the inspection is completed, clear the DTCs.
PROCEDURE
CHECK USB DEVICE OR "iPod"
Disconnect the USB device or "iPod" from the stereo jack adapter assembly.
Check if playable files are present on the USB device or "iPod".
Tech Tips
Refer to System Description for playable files Click here.
| Result | Proceed to |
|---|---|
| No playable files exist | A |
| Playable files exist | B |
| B |
|
REPLACE USB DEVICE OR "iPod" Click here |
| A |
|
END
REPLACE USB DEVICE OR "iPod"
Turn the ignition switch off.
Tech Tips
When one of these DTCs has been stored, it is necessary to turn off the ignition switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the ignition switch to ACC.
Connect a known good USB device or "iPod" to the stereo jack adapter assembly.
| NEXT |
|
CHECK FOR DTC
Clear the DTCs Click here.
Check for DTCs and check if the same DTC occurs again.
Tech Tips
If DTCs are output frequently, replace the radio receiver assembly.
| OK |
|---|
| Malfunction disappears. |
| NG |
|
REPLACE RADIO RECEIVER ASSEMBLY Click here |
| OK |
|
END (USB DEVICE OR "iPod" WAS DEFECTIVE)