METER / GAUGE SYSTEM SYSTEM DESCRIPTION


  1. METER GAUGE AND WARNING/INDICATOR LIGHT

    Gauge
    Item Signal Description
    Speedometer Calculates vehicle speed based on signal from vehicle speed sensor
    Tachometer Calculates engine speed based on signal from ECM
    ODO/TRIP Meter Calculates distance vehicle is driven or distance since trip meter knob is pressed
    Fuel Indicates remaining amount of fuel based on signal from fuel sender gauge
    Engine Coolant Temperature Indicates engine coolant temperature based on signal from ECM
    Warning/Indicator Lights
    Item Signal Description
    TURN Blinks when receiving signal that turn signal switch or hazard warning signal switch is ON
    BEAM Illuminates when headlight dimmer switch is set to HI BEAM or FLASH position
    CHARGE Illuminates when receiving malfunction signal from generator
    OIL PRESSURE Illuminates when receiving "oil pressure is abnormally low (pressure switch is ON)" signal
    MIL Illuminates when receiving malfunction signal from ECM
    DOOR Illuminates when receiving each door courtesy light switch signal
    DRIVER SEAT BELT Blinks when driver side seat belt is unfastened
    PASSENGER SEAT BELT Blinks when passenger side seat belt is unfastened
    BRAKE Illuminates when receiving signal that parking brake switch is ON, brake fluid warning switch is ON
    ABS*1 Illuminates when receiving malfunction signal from Brake actuator assembly
    SRS Illuminates when receiving malfunction signal from center airbag sensor
    FUEL Illuminates when receiving fuel empty signal from fuel sender gauge
    P*2 Illuminates when receiving P signal from park/neutral position switch assembly
    R*2 Illuminates when receiving R signal from park/neutral position switch assembly
    N*2 Illuminates when receiving N signal from park/neutral position switch assembly
    D*2 Illuminates when receiving D signal from shift control ECU
    4*3 Illuminates when receiving 4 signal from shift control ECU
    3*2 Illuminates when receiving 3 signal from shift control ECU
    2*2 Illuminates when receiving 2 signal from park/neutral position switch assembly
    L*2 Illuminates when receiving L signal from park/neutral position switch assembly
    A/T P*2, *4 Illuminates when receiving "transfer shift lever is on N and A/T shift lever is on P" signal
    TAIL*5 Illuminates when light control switch is set to TAIL or HEAD position
    FRONT FOG*6 Illuminates when front fog light switch is ON
    CRUISE*7 Illuminates when receiving "cruise control system is operating properly" signal from ECM
    A/T OIL TEMP*2, *4 Illuminates when receiving "A/T oil temperature" signal from ECM
    CENTER DIFF. LOCK*8 Illuminates when receiving "center differential lock" signal from No. 3 transfer indicator switch
    REAR DIFF. LOCK*9 Illuminates when receiving "rear differential lock" signal from No. 1 transfer indicator switch
    LEVELING*10 Illuminates when receiving "headlight leveling" signal from headlight leveling ECU

    • *1: w/ ABS

    • *2: for Automatic Transmission

    • *3: for A750F

    • *4: for 4WD

    • *5: for Optitron Meter

    • *6: w/ Front Fog Light

    • *7: w/ Cruise Control System

    • *8: w/ Center Differential Lock

    • *9: w/ Rear Differential Lock

    • *10: for HID Headlight

    Buzzer
    Item Signal Description
    Key Reminder Buzzer sounds when ignition switch is OFF, key is inserted and driver side door is open
    Driver Side Seat Belt Warning

    • When driver side seat belt is unfastened, buzzer sounds 5 times 1.8 seconds after the ignition switch is turned to ON

    • Buzzer sounds when ignition switch is ON, driver side seat belt is unfastened, vehicle speed is 15 km/h (mph) or more
    Light Reminder Buzzer sounds when ignition switch is OFF, light control switch is set to TAIL or HEAD position, and driver side door is open
    Vehicle Speed Warning Buzzer sounds when vehicle speed is 120 km/h (74 mph) or more

  2. COMBINATION METER HAS FOLLOWING FEATURES


    1. Odometer and trip meter knob


      • Press and release the knob to scroll through trip "A", trip "B" and odometer figures.


      • Press and hold the knob to reset the trip meter.

    2. Accessory meter assembly (multi-display)*


      • The accessory meter (multi-display) provides the following information: 1) outside temperature; 2) average fuel consumption for a certain distance; 3) instantaneous fuel consumption; 4) average speed for a certain distance; 5) runnable distance with the remaining amount of fuel; 6) compass; 7) elapsed time since the ignition switch was turned ON; and 8) passenger seat belt unfastened warning by blinking the seat belt warning light.


      • Press INFO to change the display item.


      • Press RESET to clear the stored data.


      • Press H to adjust the hour of the clock.


      • Press M to adjust the minutes of the clock.


      • Press 00 to set the minutes to 00.

        Tech Tips

        *: w/ Accessory Meter Assembly (multi-display)