FRONT DOOR LOCK INSPECTION


  1. INSPECT FRONT DOOR LOCK (FOR DRIVER SIDE)


    1. A01J4IAE21

      Apply battery voltage to the door lock and check operation of the door lock motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 4

      Battery negative (-) → Terminal 1

      		 Lock

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 4

      		 Unlock

      If the result is not as specified, replace the door lock assembly.

    2. A01J6EHE02

      Measure the resistance of the door lock and unlock switch.

      Standard resistance
      Tester Connection Door Lock Condition Specified Condition
      9 - 7 Lock Below 1 Ω
      9 - 7, 10 - 7 OFF 10 kΩ or higher
      10 - 7 Unlock Below 1 Ω

      If the result is not as specified, replace the door lock assembly.

  2. INSPECT FRONT DOOR LOCK (FOR PASSENGER SIDE)


    1. A01J2YRE10

      Apply battery voltage to the door lock and check operation of the door lock motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 4

      Battery negative (-) → Terminal 1

      		 Lock

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 4

      		 Unlock

      If the result is not as specified, replace the door lock assembly.

  3. INSPECT POWER WINDOW REGULATOR MASTER SWITCH (DOOR CONTROL SWITCH)


    1. A01J5OCE02

      Measure the resistance of the door control switch.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      5 - 3 Lock Below 1 Ω
      5 - 3, 8 - 3 OFF 10 kΩ or higher
      8 - 3 Unlock Below 1 Ω

      If the result is not as specified, replace the door lock assembly.