TRANSMITTER BATTERY INSTALLATION


  1. INSTALL TRANSMITTER BATTERY

    Note

    Take extra care when handling these precision electronic components.


    1. A01J3O1E02

      Install a battery (lithium battery: CR2016) with the positive (+) side facing up, as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Be sure that the positive (+) and negative (-) side of the transmitter battery are matched up correctly.

      • Be careful not to bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. A01J4DLE01

      Detach the hook of the transmitter battery's cover and install the cover.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

  2. INSTALL DOOR CONTROL TRANSMITTER MODULE


    1. A01J48EE01

      Install the door control transmitter module.

      Note

      When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

  3. INSTALL TRANSMITTER HOUSING COVER


    1. A01J770

      Install the transmitter housing cover to the transmitter housing case.

    2. Check that the transmitter's LED illuminates 3 times when the switch is pressed 3 times.

      OK
      Transmitter's LED illuminates 3 times when switch is pressed 3 times.