WIPER SWITCH INSTALLATION


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. Attach the claw to install the windshield wiper switch.

      Note

      Do not push the claw with excessive force as damage may occur.

    2. Connect the connectors.

  2. INSTALL STEERING COLUMN LOWER COVER


    1. A01J6ETE01

      Install the lower cover with the 3 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  3. INSTALL STEERING COLUMN UPPER COVER


    1. A01J6ETE01

      Install the lower cover with the 3 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.