WIPER SWITCH REMOVAL

Tech Tips


  • Use the same procedures for the RH and LH side.

  • The procedures listed below are for the LH side.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE STEERING COLUMN UPPER COVER


    1. A01J4NQE01

      Remove the 3 screws and lower cover.

  3. REMOVE STEERING COLUMN LOWER COVER


    1. A01J4NQE01

      Remove the 3 screws and lower cover.

  4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01J3JF

      Disconnect the connectors.

    2. Detach the claw and remove the windshield wiper switch.

      Note

      Do not push the claw with excessive force as damage may occur.