REAR WIPER RUBBER REPLACEMENT


  1. REMOVE REAR WIPER BLADE ASSEMBLY


    1. A01J7F7

      Raise the wiper arm, and then detach the claw by rotating the wiper blade to the position where a "click" sound" is heard as shown in the illustration.

      Note

      Be careful not to damage the claw.

    2. A01J5RS

      Pull the wiper blade straight toward the right side of the vehicle to remove it from the wiper arm.

      Note

      Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the back door glass surface.

  2. REMOVE REAR WIPER RUBBER


    1. A01J7L1E02
      Text in Illustration
      *a Stopper (Rear End of Blade)
      *b Lightly Push (Grip)
      *c Lift
      *d Pull

      Lift and pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration to remove the wiper rubber.

      Note

      Do not forcibly pull out the wiper rubber. The backing plates will be deformed or the blade claws will be damaged.

      Tech Tips

      Lightly pushing the rubber between the end and middle allows it to be removed more easily.

    2. Remove the 2 wiper rubber backing plates from the wiper rubber.

  3. INSTALL REAR WIPER RUBBER


    1. A01J5Q9E02
      Text in Illustration
      *1 Backing Plate
      *a Curved

      Install the 2 backing plates as shown in the illustration.

      Note

      Install the backing plates so that they are facing in the correct direction.

    2. A01J3K8E02
      Text in Illustration
      *a Second Claw
      *b Rear End Claw
      *c Rear End Stopper

      Insert the wiper rubber into the front end of the wiper blade and slide it towards the rear end through the second claw.

    3. After pushing the wiper rubber through the rear end claw, allow it to pass over the rear end stopper.

    4. A01J4ATE01
      Text in Illustration
      *1 Front End Claw

      Slide the wiper rubber through the front end claw.

  4. INSTALL REAR WIPER BLADE ASSEMBLY


    1. A01J409

      Push the wiper blade straight toward the left side of the vehicle to attach the claw and install the wiper blade to the wiper arm.

      Note

      Be careful not to damage the claw.

    2. Close the wiper blade holder.