REAR WIPER MOTOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE BACK DOOR TRIM BOARD ASSEMBLY


    1. A01J30U

      Detach the 16 clips and remove the back door trim board.

  3. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY

    A01J5SZ

    1. Detach the 2 claws and remove the cap.

    2. A01J3RR

      Remove the nut and arm and blade.

  4. REMOVE REAR WIPER MOTOR ASSEMBLY

    A01J4A7

    1. Disconnect the connector.

    2. Remove the 3 bolts and wiper motor.

  5. REMOVE REAR WIPER MOTOR GROMMET


    1. A01J50X

      Remove the rear wiper motor grommet.