FRONT WIPER RUBBER REPLACEMENT


  1. REMOVE FRONT WIPER BLADE


    1. A01J4GO

      Detach the claw as shown in the illustration.

    2. A01J4ZV

      Remove the front wiper blade as shown in the illustration.

      Note

      Do not fold the wiper arm with the wiper blade removed. The arm tip may damage the windshield surface.

  2. REMOVE WIPER RUBBER


    1. A01J6FN

      Detach the head part (large side) of the wiper rubber from the wiper blade.

    2. A01J3K1E03
      Text in Illustration
      *a Head Part (Large Side)

      Remove the wiper rubber in the direction indicated by the arrow in the illustration.

      Note

      Do not pull out the wiper rubber forcibly. Doing so will deform the backing plates or damage the blade claw.

    3. Remove the 2 wiper rubber backing plates from the wiper rubber.

  3. INSTALL WIPER RUBBER


    1. A01J5Q9E02
      Text in Illustration
      *1 Backing Plate
      *a Curved

      Install the 2 backing plates to the rubber.

      Note

      Install the backing plates facing the proper direction.

    2. A01J6A4E03
      Text in Illustration
      *a Head Part (Large Side)

      Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration.

      Tech Tips

      Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle.

    3. A01J7OX

      Attach the head part (large side) of the rear wiper rubber to the claw on the end of the wiper blade.

      Note

      Push the wiper blade into the grooves of the wiper rubber to attach the wiper rubber completely.

  4. INSTALL FRONT WIPER BLADE


    1. A01J7HC

      Attach the claw to install the front wiper blade.