FRONT WIPER MOTOR ON-VEHICLE INSPECTION


  1. INSPECT WINDSHIELD WIPER LINK ASSEMBLY


    1. A01J42WE01

      Operate the front wipers while spraying washer fluid on the windshield glass. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.

      Standard
      Area Standard Condition
      A 25.0 mm (0.984 in.)
      B 30.4 mm (1.19 in.)
      C 24.3 mm (0.956 in.)
      D 24.7 mm (0.972 in.)
      E 19.0 mm (0.748 in.)

    2. Stop the front wiper motor and link assembly operation.

    3. A01J35CE01
      Text in Illustration
      *A for LH Side
      *B for RH Side
      *1 Louver Edge

      Check the automatic stop position.

      OK
      The front wipers stop at the positions shown in the illustration.
      Standard
      Area Standard Condition
      A 25 mm (0.984 in.)
      B 33 mm (1.29 in.)
      C 25 mm (0.984 in.)
      D 25 mm (0.984 in.)

      If the result is not as specified, remove and reinstall the wiper arm and blade assembly, and perform the on-vehicle inspection described above to inspect the wiper motor and link assembly again.

      If the result is not as specified again, inspect the wiper motor and link assembly with it removed from the vehicle body Click here.