FOG LIGHT RELAY ON-VEHICLE INSPECTION


  1. CHECK INTEGRATION RELAY (FOG RELAY)

    A01J6R3E02

    1. Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room junction block..

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01J6YBE02

      Measure the voltage of the FOG relay.

      Standard voltage
      Tester Connection Switch Condition Specified Condition
      1I-4 - Body ground Fog light switch ON and headlight dimmer switch set to TAIL or HEAD 10 to 14 V

      If the result is not as specified, replace the integration relay.