HEIGHT CONTROL SENSOR INSTALLATION


  1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH


    1. A01J2ZU

      Rotate the rear height control sensor sub-assembly LH in the direction indicated by the arrow in the illustration to attach the claw.

    2. A01J51RE01
      Text in Illustration
      *1 Matchmarks

      Install the 2 bolts in the order shown in the illustration to install the rear height control sensor sub-assembly LH.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Align the matchmarks on the rear height control sensor sub-assembly LH link and bracket.

    4. Connect the sensor link with the nut.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    5. Connect the connector.

  2. PERFORM INITIALIZATION

    Click here