HAZARD WARNING SWITCH INSTALLATION


  1. INSTALL HAZARD WARNING SIGNAL SWITCH ASSEMBLY (for Manual Air Conditioning System)

    A01J6PNE01

    1. Install the switch to attach the 2 claws.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER


    1. for Manual Air Conditioning System:


      1. Connect the connectors.

      2. Attach the 4 claws to connect the air conditioner control.

      3. Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.

    2. for Automatic Air Conditioning System:


      1. Connect the connectors.

      2. Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.

  3. INSTALL FRE/REC CONTROL KNOB (for Manual Air Conditioning System)

    A01J5GZ

    1. Install the heater control knob as shown in the illustration.

  4. INSTALL HEATER CONTROL KNOB (for Manual Air Conditioning System)

    A01J6FS

    1. Install the No. 2 heater control knob as shown in the illustration.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  6. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.