ROOM LIGHT ASSEMBLY REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE NO. 1 ROOM LIGHT LENS

    A01J61GE01

    1. Using a screwdriver, detach the 4 claws and remove the lens.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE NO. 1 ROOM LIGHT ASSEMBLY

    A01J68P

    1. Remove the 2 screws and room light.

    2. Disconnect the light connector.

  4. REMOVE NO. 1 ROOM LIGHT BULB


    1. Remove the bulb from the room light.

  5. REMOVE NO. 2 ROOM LIGHT LENS

    A01J61GE01

    1. Using a screwdriver, detach the 4 claws and remove the lens.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE NO. 2 ROOM LIGHT ASSEMBLY

    A01J68P

    1. Remove the 2 screws and room light.

    2. Disconnect the light connector.

  7. REMOVE NO. 2 ROOM LIGHT BULB


    1. Remove the bulb from the room light.