HEADLIGHT ASSEMBLY (for HID Headlight) INSTALLATION

CAUTION:

Make sure that the headlight control ECU sub-assembly LH is not connected or hot before installation the headlight control ECU sub-assembly.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL HEADLIGHT ASSEMBLY LH


    1. Connect the connectors.

    2. Install the headlight assembly LH with the bolt and 3 screws.

  2. INSTALL FRONT BUMPER COVER


    1. w/ Headlight Cleaner System:

      Connect the headlight cleaner hose.

    2. w/ Fog Light:

      Connect the 2 fog light connectors.

    3. Attach the 8 claws to install the front bumper cover.

    4. Install the 5 clips, 2 bolts and 2 screws.

    5. Install the 3 clips and 6 screws.

  3. INSTALL FOG LIGHT COVER LH


    1. Attach the 8 claws to install the fog light cover.

  4. INSTALL FOG LIGHT COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL RADIATOR GRILLE


    1. Attach the 6 claws to install the radiator grille.

    2. Install the 2 screws and 2 clips.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. ADJUST HEADLIGHT AIMING

    Click here

  8. ADJUST FOG LIGHT AIMING

    Click here

  9. PERFORM INITIALIZATION

    Click here