TRANSPONDER KEY AMPLIFIER INSTALLATION


  1. INSTALL TRANSPONDER KEY AMPLIFIER


    1. Connect the transponder key amplifier connector.

    2. A01J6K7E03

      Align the claw of the transponder key amplifier with the upper bracket.

    3. Push in the transponder key amplifier and install it to the upper bracket.

      Note

      Do not push in the amplifier with excessive force as it may be damaged.

  2. INSTALL STEERING COLUMN UPPER COVER


    1. A01J6ETE01

      Install the lower cover with the 3 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  3. INSTALL STEERING COLUMN LOWER COVER


    1. A01J6ETE01

      Install the lower cover with the 3 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.