TRANSPONDER KEY AMPLIFIER REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE STEERING COLUMN LOWER COVER


    1. A01J4NQE01

      Remove the 3 screws and lower cover.

  3. REMOVE STEERING COLUMN UPPER COVER


    1. A01J4NQE01

      Remove the 3 screws and lower cover.

  4. REMOVE TRANSPONDER KEY AMPLIFIER


    1. A01J70GE02

      Using a screwdriver, widen the claw attached to the upper bracket by approximately 1.0 mm (0.039 in.).

    2. Pull out the transponder key amplifier with the claw open.

    3. Disconnect the transponder key amplifier connector.