REAR SEAT OUTER BELT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the RH side.


  1. REMOVE REAR NO. 2 SEAT ASSEMBLY RH

    A01J760E01

    1. Remove the 2 bolts.

    2. Unlock the seat legs by horizontally pulling the release band. Then remove the seat.

      Note

      Be careful not to damage the vehicle body,

  2. REMOVE BACK DOOR SCUFF PLATE

    A01J5YF

    1. Detach the 4 claws, 2 guides and 6 clips and remove the back door scuff plate.

  3. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. REMOVE QUARTER TRIM HOOK

    A01J6J8

    Tech Tips

    Use the same procedure for both quarter trim hooks.


    1. Remove the screw and quarter trim hook.

  6. DISCONNECT REAR NO. 1 SEAT BELT ASSEMBLY OUTER RH

    A01J3CU

    1. Detach the 2 claws and remove the lap belt outer anchor cover.

    2. Remove the bolt and disconnect the seat belt.

  7. DISCONNECT REAR NO. 2 SEAT BELT ASSEMBLY OUTER RH

    A01J729

    1. Disconnect the rear No. 2 seat belt outer anchor.


      1. Detach the 2 claws and remove the lap belt outer anchor cover.

      2. Remove the bolt and disconnect the seat belt.

  8. REMOVE QUARTER INSIDE TRIM BOARD RH

    A01J4KR

    1. Detach the 2 claws and remove the outer lap belt anchor cover.

      Tech Tips

      Use the same procedure for both outer lap belt anchor covers.

    2. A01J4XX

      Remove the bolt and disconnect the rear No. 1 seat outer belt floor anchor.

    3. A01J4Z3

      Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor.

    4. Using a clip remover, remove the clip.

    5. Detach the 8 claws and 10 clips and remove the quarter inside trim board.

      A01J7B4

  9. REMOVE REAR NO. 1 SEAT BELT ASSEMBLY OUTER RH

    A01J7CRE05

    1. Using a screwdriver, detach the 2 claws and open the seat belt anchor cover as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the bolt and disconnect the seat belt's shoulder anchor.

    3. A01J3G5E01

      Remove the bolt and seat belt.

  10. REMOVE REAR NO. 2 SEAT BELT ASSEMBLY OUTER LH

    A01J7CRE05

    1. Using a screwdriver, detach the 2 claws and open the seat belt anchor cover as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the bolt and disconnect the seat belt's shoulder anchor.

    3. A01J5EQE01

      Remove the bolt and seat belt.