REAR SEAT INNER BELT ASSEMBLY INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY RH

    A01J33RE01

    1. Install the seat belt with the nut as shown in the illustration.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and the protruding parts of the floor panel.

  2. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY LH


    1. Install the seat belt with the nut as shown in the illustration.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and the protruding parts of the floor panel.

  3. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER LH

    A01J6A9E02

    1. Install the seat belt with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      The anchor part of the seat belt must not overlap the protruding part.

  4. INSTALL REAR NO. 1 SEAT RECLINING COVER LH


    1. A01J63L

      Attach the 2 guides and claw to install the rear No. 1 seat reclining cover LH.

    2. Install the screw.

  5. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY LH

    A01J4X0E02

    1. Install the seat belt LH with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the seat.

  6. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY CENTER

    A01J4XJE02

    1. Install the seat belt center with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the seat.

  7. INSTALL REAR NO. 1 SEAT CUSHION COVER RH

    A01J6UZE01
    Text in Illustration
    *1 No. 1 Fold Seat Stopper Band Assembly
    *2 Hog Ring Pliers

    1. Using hog ring pliers, install the rear No. 1 seat cushion cover to the rear No. 1 seat cushion pad RH with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. Pass the rear seat lap type belt assembly RH and rear center seat lap type belt assembly through the hole of the rear No. 1 seat cushion cover to the surface.

    3. Insert the No. 1 fold seat stopper band assembly to the rear No. 1 seat cushion cover.

  8. INSTALL REAR NO. 1 SEAT RECLINING COVER RH


    1. A01J4BK

      Attach the guide and 3 claws to install the rear No. 1 reclining cover RH.

    2. Install the screw.

  9. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH


    1. A01J456

      Install the reclining adjuster release handle RH with the screw.

  10. INSTALL REAR NO. 1 SEAT BELT ASSEMBLY INNER RH

    A01J3SIE02

    1. Install the seat belt with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding parts of the seat.

  11. INSTALL REAR NO. 1 SEAT RECLINING COVER LH


    1. A01J3JP

      Attach the guide and 3 claws to install the rear No. 1 seat reclining cover LH.

    2. Install the screw.