FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) INSTALLATION

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    A01J5FNE01

    1. Install the buckle cover on the inner belt.

    2. A01J60CE01

      w/ Passenger Seat Belt Warning Light:

      Attach the wire harness to the clamp.

    3. Install the seat belt with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.

    4. A01J71LE01

      w/ Passenger Seat Belt Warning Light:


      1. Attach the 2 clamps as shown in the illustration.

      2. Connect the connector.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

    A01J5XT

    1. Install the buckle cover on the seat belt.

    2. A01J7H1E01

      Attach the wire harness to the clamp.

    3. Install the seat belt with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.

    4. A01J7IYE01

      Attach the clamp as shown in the illustration.

  3. INSTALL FRONT SEAT ASSEMBLY LH


    1. Install the front seat assembly LH Click here.

  4. INSTALL FRONT SEAT ASSEMBLY RH


    1. Install the front seat assembly RH Click here.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.