FRONT SEAT INNER BELT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL FRONT SEAT CUSHION COVER LH


    1. A01J3O6

      Install the front seat cushion cover LH to the front seat inner belt assembly LH.

      Tech Tips

      Use the same procedure described for the RH side.

  2. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH


    1. Install the front seat belt anchor plate.

    2. A01J6ZIE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly LH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the front seat inner belt assembly LH and protruding part of the front seat cushion frame sub-assembly LH.

    3. Attach the wire harness to the clamp.

    4. Attach the clamp.

  3. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH


    1. Install the front seat belt anchor plate.

    2. A01J3I4E01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly RH with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not overlap the anchor part of the front seat inner belt assembly RH and protruding part of the front seat cushion frame sub-assembly RH.

    3. Attach the wire harness to the clamp.

    4. A01J5S7E01
      Text in Illustration
      *1 Front

      Connect the connector and attach the 2 clamps as shown in the illustration.

  4. INSTALL FRONT SEAT ASSEMBLY LH


    1. Install the front seat assembly LH Click here.

  5. INSTALL FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.