FRONT AIRBAG SENSOR REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE RADIATOR GRILLE


    1. A01J4NX

      Remove the 2 clips and 2 screws.

    2. A01J4W2E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the radiator grille.

    3. Detach the 6 claws and remove the radiator grille.

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. Remove the bolt, nut and battery clamp.

  5. REMOVE BATTERY


    1. Disconnect the cable from positive (+) battery terminal.

    2. Remove the battery.

  6. REMOVE FRONT AIRBAG SENSOR LH


    1. A01J6RR

      Remove the nut and front airbag sensor LH.

    2. Disconnect the connector.