ENGINE HOOD COURTESY SWITCH INSPECTION


  1. INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)

    A01J691E01
    Text in Illustration
    *a

    Component without harness connected

    (Hood Lock Assembly)
    *b Unlock Position
    *c Lock Position

    1. Measure the resistance of according to the value(s) in the table below.

      Tester Connection Switch Condition Specified Condition
      1 - 2 Unlock position 10 kΩ or higher
      1 - 2 Lock position Below 1 Ω

      If the result is not as specified, replace the hood lock assembly.