FRONT PASSENGER AIRBAG ASSEMBLY REMOVAL

CAUTION:

Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Click here.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    A01J6ZME01
    Text in Illustration
    *1 Stopper

    1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. A01J44JE01
      Text in Illustration
      *1 Hinge

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  3. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY

    A01J5UCE01

    1. Disconnect the connector from the airbag.

      Note

      When handling the airbag connector, do not damage the airbag wire harness.

    2. A01J4ID

      Remove the 2 bolts.

    3. Detach the clamp from the bracket.

    4. A01J7AJE02

      Detach the 12 claws and remove the airbag.