REAR BLOWER CONTROL SWITCH INSTALLATION


  1. INSTALL COOLER (REAR) SWITCH


    1. Connect the connector.

    2. Attach the 2 claws to install the cooler (rear) switch.

  2. INSTALL SWITCH BASE


    1. Connect the connectors.

    2. Attach the 8 claws to install the switch base.

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Attach the 3 guides, 2 claws and 3 clips to install the lower instrument panel finish panel.

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A01J654E01
    Text in Illustration
    *1 Hinge

    1. Attach the 2 hinges to install the glove compartment door.

    2. A01J6X7E01
      Text in Illustration
      *1 Stopper

      While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.

  5. INSTALL COOLER CONTROL SWITCH ASSEMBLY


    1. Connect the connector.

    2. A01J3HX

      Attach the 2 clips to install the cooler control switch assembly (rear blower control switch) as shown in the illustration.