REAR BLOWER CONTROL SWITCH REMOVAL


  1. REMOVE COOLER CONTROL SWITCH ASSEMBLY

    A01J5ONE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 clips and remove the cooler control switch assembly (rear blower control switch) as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    A01J3ELE01

    1. for Manual Air Conditioning System:


      1. Put protective tape around the center instrument cluster finish panel.

      2. Using a moulding remover, detach the 10 claws and 4 clips.

      3. A01J3P7
        Text in Illustration
        *1 Protective Tape

        Detach the 4 claws and disconnect the air conditioner control.

      4. Disconnect the connectors and remove the center instrument cluster finish panel.

    2. A01J7H9E01
      Text in Illustration
      *1 Protective Tape

      for Automatic Air Conditioning System:


      1. Put protective tape around the center instrument cluster finish panel.

      2. Using a moulding remover, detach the 8 claws and 4 clips.

      3. Disconnect the connectors and remove the center instrument cluster finish panel.

  3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    A01J6ZME01
    Text in Illustration
    *1 Stopper

    1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. A01J44JE01
      Text in Illustration
      *1 Hinge

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

    A01J74M

    1. Detach the 2 claws, 3 clips and 3 guides and remove the lower instrument panel finish panel.

  5. REMOVE SWITCH BASE

    A01J443

    1. Detach the 8 claws.

      Tech Tips

      If the claws are difficult to detach, detach the claws from the back of the switch base.

    2. Disconnect the connectors and remove the switch base.

  6. REMOVE COOLER (REAR) SWITCH

    A01J5XO

    1. Detach the 2 claws and remove the cooler (rear) switch.

    2. Disconnect the connector.