AIR CONDITIONING PANEL (for Manual Air Conditioning System) REMOVAL


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

    A01J3ELE01

    1. for Manual Air Conditioning System:


      1. Put protective tape around the center instrument cluster finish panel.

      2. Using a moulding remover, detach the 10 claws and 4 clips.

      3. A01J3P7
        Text in Illustration
        *1 Protective Tape

        Detach the 4 claws and disconnect the air conditioner control.

      4. Disconnect the connectors and remove the center instrument cluster finish panel.

    2. A01J7H9E01
      Text in Illustration
      *1 Protective Tape

      for Automatic Air Conditioning System:


      1. Put protective tape around the center instrument cluster finish panel.

      2. Using a moulding remover, detach the 8 claws and 4 clips.

      3. Disconnect the connectors and remove the center instrument cluster finish panel.

  2. REMOVE COOLER SWITCH

    A01J79A

    1. Detach the 2 claws.

    2. Disconnect the connector and remove the cooler switch.

  3. REMOVE NO. 2 HEATER CONTROL KNOB

    A01J3IE

    1. Remove the No. 2 heater control knob as shown in the illustration.

  4. REMOVE HEATER CONTROL KNOB

    A01J3YU

    1. Remove the heater control knob as shown in the illustration.

  5. DISCONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY

    A01J73G

    1. Detach the 2 claws and disconnect the air inlet damper control cable sub-assembly.

  6. DISCONNECT HEATER CONTROL CABLE SUB-ASSEMBLY

    A01J40P

    1. Detach the 2 claws and disconnect the heater control cable sub-assembly.

  7. DISCONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY

    A01J657

    1. Detach the 2 claws and disconnect the air mix damper control cable sub-assembly.

  8. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. Disconnect the connector and remove the air conditioning control assembly.