REAR BLOWER MOTOR INSTALLATION


  1. INSTALL REAR BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    1. Install the rear blower motor with fan sub-assembly with the 3 screws.

    2. Connect the connector.

  2. INSTALL QUARTER INSIDE TRIM BOARD RH


    1. Detach the 8 claws and 10 clips to install the quarter inside trim board.

    2. Install the clip.

    3. Connect the rear No. 2 seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    4. Connect the rear No. 1 seat outer belt floor anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    5. Attach the 2 claws to install the outer lap belt anchor cover.

      Tech Tips

      Use the same procedure for both outer lap belt anchor covers.

  3. INSTALL QUARTER TRIM HOOK

    Tech Tips

    Use the same procedure for both quarter trim hooks.


    1. Install the quarter trim hook with the screw.

  4. INSTALL BACK DOOR SCUFF PLATE


    1. Attach the 4 claws, 2 guides and 6 clips to install the back door scuff plate.

  5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR NO. 2 SEAT ASSEMBLY

    Click here