COMPRESSOR (for 2TR-FE) DISASSEMBLY


  1. REMOVE COOLER BRACKET

    A01J7E2

    1. Detach the 2 clamps.

    2. Remove the screw and cooler bracket.

  2. REMOVE MAGNET CLUTCH ASSEMBLY

    A01J7FXE01

    1. Clamp the cooler compressor in a vise between aluminum plates.

    2. Using SST, hold the magnet clutch hub.

      SST
      09985-00260

    3. Remove the bolt, magnet clutch hub and magnet clutch washer(s).

      Tech Tips

      There is no set number of magnet clutch washers since they are used for adjusting.

    4. A01J3GJ

      Using a snap ring expander, remove the snap ring and magnet clutch rotor.

      Note

      Do not damage the seal cover of the bearing when removing the snap ring.

    5. Detach the connector clamp.

    6. A01J6FQ

      Using a snap ring expander, remove the snap ring and magnet clutch stator.