VANE PUMP (for 1GR-FE) REMOVAL

Note


  • When using a vise, do not overtighten it.

  • When installing, coat the parts indicated by the arrows with power steering fluid Click here.


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE FAN AND GENERATOR V BELT

    A01J4C6E01

    1. While releasing the belt tension by turning the belt tensioner counterclockwise, remove the V-ribbed belt from the belt tensioner.

  3. DRAIN POWER STEERING FLUID

  4. DISCONNECT OIL RESERVOIR TO PUMP HOSE


    1. A01J4IRE01

      Disengage the clip and disconnect the hose.

  5. DISCONNECT PRESSURE FEED TUBE ASSEMBLY


    1. A01J525

      Remove the union bolt, then disconnect the pressure feed tube.

    2. Remove the gasket from the pressure feed tube.

  6. REMOVE VANE PUMP ASSEMBLY


    1. A01J79YE01

      Disconnect the oil pressure switch connector.

    2. Remove the bolt and wire harness clamp bracket.

    3. A01J30LE01

      Remove the 2 bolts and vane pump.