FRONT BRAKE REMOVAL

Tech Tips


  • Use the same procedures for the LH side and RH side.

  • The procedures listed below are for the LH side.


  1. REMOVE FRONT WHEEL

  2. DRAIN BRAKE FLUID

    Note

    Wash off brake fluid immediately if it comes in contact with any painted surface.

  3. REMOVE FRONT DISC BRAKE ANTI-RATTLE SPRING


    1. A01J4S8E02

      Remove the 2 clip. Then remove the 2 pins.

    2. Remove the spring.

      Note

      The anti-rattle spring can be reused if it has sufficient rebound; no deformation, cracks or wear; and has all rust, dirt and foreign matter cleaned off.

  4. REMOVE FRONT DISC BRAKE PAD


    1. Remove the 2 disc brake pads.

  5. REMOVE FRONT ANTI-SQUEAL SHIM KIT


    1. Remove the No.1 and No. 2 shims from each pad.

  6. DISCONNECT FRONT NO. 1 WHEEL CYLINDER TUBE LH


    1. A01J5HS

      Using a union nut wrench, disconnect the tube from the cylinder.

  7. REMOVE DISC BRAKE CYLINDER ASSEMBLY LH


    1. A01J5K3

      Remove the 2 bolts and cylinder.