BRAKE BOOSTER REMOVAL


  1. DRAIN BRAKE FLUID

    Note

    Wash off brake fluid immediately if it comes in contact with any painted surface.

  2. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY


    1. Remove the brake master cylinder Click here.

  3. REMOVE BRAKE BOOSTER ASSEMBLY


    1. Disconnect the vacuum hose.

    2. Remove the check valve and grommet from the booster.

    3. A01J4R0E01

      Remove the return spring, clip and clevis pin.

    4. Loosen the push rod clevis lock nut.

    5. A01J3D3

      Remove the 4 nuts and push rod clevis.

    6. Pull out the booster and gasket.