VANE PUMP (for 2TR-FE) DISASSEMBLY


  1. FIX VANE PUMP ASSEMBLY

    A01J5O0E01

    1. Using SST, fix the vane pump between aluminum plates in a vise, as shown in the illustration.

      SST
      09630-00014   ( 09631-00132 )

  2. REMOVE FLOW CONTROL VALVE

    A01J7AQE01

    1. Using a 27 mm socket wrench, remove the pressure port union from the front housing.

    2. Using a screwdriver, remove the O-ring from the pressure port union.

    3. Remove the flow control valve from the front housing.

    4. Remove the compression spring from the front housing.

  3. REMOVE POWER STEERING OIL PRESSURE SWITCH


    1. Remove the oil pressure switch from the front housing.

  4. REMOVE REAR VANE PUMP HOUSING

    A01J3LCE01

    1. Remove the 4 bolts and rear housing from the front housing.

    2. Remove the O-ring from the rear housing.

  5. REMOVE SHAFT WITH PULLEY

    A01J54WE01

    1. Using a screwdriver, remove the shaft snap ring from the shaft with pulley.

    2. Remove the shaft with pulley from the rear housing.

  6. REMOVE VANE PUMP ROTOR


    1. Remove the 10 vane pump plates from the vane pump rotor.

      Note

      Be careful not to drop the vane plates.

    2. Remove the vane pump rotor from the front housing.

  7. REMOVE VANE PUMP CAM RING

  8. REMOVE FRONT VANE PUMP SIDE PLATE

    A01J6GJE01

    1. Remove the front side plate from the front housing.

    2. Remove the No. 1 O-ring from the side plate.

    3. A01J64HE02

      Remove the No. 2 O-ring from the front housing.

  9. REMOVE VANE PUMP HOUSING OIL SEAL

    A01J5IBE01

    1. Using a screwdriver, pry out the oil seal.

      Tech Tips

      Tape the screwdriver tip before use.