DECELERATION SENSOR (for 4WD and Pre-Runner) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT SEAT ASSEMBLY RH


    1. Remove the front seat assembly RH Click here.

  3. REMOVE FLOOR CARPET COVER


    1. A01J41Q

      Detach the 4 claws and remove the floor carpet cover.

  4. REMOVE SENSOR BRACKET


    1. Remove the 2 bolts and sensor bracket.

  5. REMOVE DECELERATION SENSOR


    1. A01J63VE01

      Disconnect the deceleration sensor connector.

    2. Remove the deceleration sensor.