REAR SPEED SENSOR (for 4WD and Pre-Runner) ON-VEHICLE INSPECTION


  1. INSPECT REAR SPEED SENSOR

    A01J5HAE02

    1. Measure the resistance of the sensor.

      Standard resistance
      Rear speed sensor LH
      Tester Connection Specified Condition
      1(RL-) - 2 (RL+) 0.75 to 2.0 kΩ
      1(RL-) - Body ground 10 kΩ or higher
      2 (RL+) - Body ground 10 kΩ or higher
      Rear speed sensor RH
      Tester Connection Specified Condition
      1 (RR-) - 2 (RR+) 0.75 to 2.0 kΩ
      1 (RR-) - Body ground 10 kΩ or higher
      2 (RR+) - Body ground 10 kΩ or higher

      • If the result is not as specified, replace the speed sensor.

      Tech Tips

      Check the speed sensor signal after speed sensor replacement Click here.