BRAKE MASTER CYLINDER DISASSEMBLY


  1. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY


    1. Remove the screw.

    2. Remove the brake master cylinder reservoir from the brake master cylinder sub-assembly.

  2. REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.

  3. REMOVE BRAKE FLUID INFORMATION LABEL

  4. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY


    1. Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.

  5. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER


    1. Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.

  6. REMOVE BRAKE MASTER CYLINDER KIT


    1. A01J6HW

      Push in the piston and remove the snap ring using snap ring pliers.

    2. A01J4U7

      Push in the piston and remove the piston stopper bolt and gasket.

    3. Remove the No. 1 piston from the master cylinder body by pulling it straight out.

      Note

      Do not scratch the inside of the cylinder body.

    4. A01J645

      Tap the flanged part against wooden blocks until the end of the No. 2 piston comes out. When the end of the No. 2 piston comes out, pull the No. 2 piston straight out of the master cylinder body.

      Note

      Do not scratch the inside of the cylinder body.