BRAKE MASTER CYLINDER REMOVAL


  1. DRAIN BRAKE FLUID

    Note

    Wash off brake fluid immediately if it comes in contact with any painted surface.

  2. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY (w/o ABS)

    A01J7AGE01

    1. for Manual Transmission:

      Disconnect the clutch reservoir tube labeled A from the master cylinder.

    2. Disconnect the brake fluid warning switch connector labeled B.

    3. Using a union nut wrench, disconnect the 6 brake lines labeled C from the master cylinder and 4-way.

    4. A01J4OR

      Remove the 2 nuts and bracket (with 4-way).

    5. Pull out the master cylinder from the brake booster.

    6. Remove the O-ring from the master cylinder.

  3. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY (w/ ABS)

    A01J5YNE01

    1. for Manual transmission:

      Disconnect the clutch reservoir tube labeled A from the master cylinder.

    2. Disconnect the brake fluid level warning switch connector labeled B.

    3. Using a union nut wrench, disconnect the 5 brake lines labeled C from the master cylinder and 3-way.

    4. A01J3RO

      Remove the 2 nuts and bracket (with 3-way).

    5. Pull out the master cylinder from the brake booster.

    6. Remove the O-ring from the master cylinder.