BRAKE PEDAL REASSEMBLY


  1. INSTALL BRAKE PEDAL PAD


    1. Install the pad to the pedal.

  2. INSTALL STOP LIGHT SWITCH ASSEMBLY

    A01J63IE01

    1. Install the adjuster to the support.

    2. Insert the switch into the adjuster until it slightly touches the pedal.

      Note

      Do not depress the pedal.

    3. A01J39UE01

      Turn the switch a quarter turn clockwise.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

      Note

      Do not depress the pedal.

    4. Connect the switch connector to the switch.

    5. Check the switch clearance.

      Standard stop light switch clearance
      1.5 to 2.5 mm (0.059 to 0.098 in.)

  3. INSTALL BRAKE PEDAL SUB-ASSEMBLY


    1. A01J3BFE02

      Apply a light coat of lithium soap base glycol grease to 2 new bushes, the brake pedal shaft collar and shaft.

    2. Install the brake pedal shaft collar and 2 bushes to the pedal.

    3. Install the pedal to the support with the shaft and nut.

      Torque:
      26 N*m  { 265 kgf*cm, 19 ft.*lbf }