REAR SHOCK ABSORBER REMOVAL

Tech Tips


  • Use the same procedures described for the RH side and LH side.

  • The procedures listed below are for the LH side.


  1. REMOVE REAR WHEEL

  2. REMOVE REAR SHOCK ABSORBER ASSEMBLY

    A01J2ZC

    1. Support the axle housing.


      1. Jack up and support the vehicle's frame on stands.

      2. Lower the axle housing until the coil spring tension is free, and maintain this position.

    2. Remove the nut and 2 retainers.

    3. A01J7LO

      Remove the 2 bolts.

    4. Disconnect the shock absorber and 2 bushes from the axle housing and frame.

    5. Remove the lock nut, bracket, 3 retainers and 2 cushions.